Changelog

Version 1.5.5 (17 July 2026)

• Newly added properties will automatically be added to the Products table. (disable in preferences)

• Fixed an issue that caused Engineering Data Migration to edit files that should be skipped when they are already copied.

Version 1.5.4 (8 July 2026)

First public release of 1.5, read the beta changes below for more details about what this version contains.

• Regex analyze rules can now be given a custom fail message to show when a property does not pass the rule (replaces the custom message in the regexbuilder that was available during beta)

• Renamed DataCopy to Engineering Data Migration

• Moved the SolidConnect general settings into it's own page.

• Engineering Data Migration now needs to be activated for 5 tokens in the License Manager, and the tab will be hidden when it is not activated

• Adding a new CSV export now automatically chooses the correct delimiter based on system settings

• The LOV settings textbox no longer automatically adds multiple items if separated by comma, which now allows for values to contain a comma

• Added separate buttons on the tasks tab that were previously hidden behind a dropdown.

• The property editor now shows all fields as greyed-out if the file is considered readonly for any reason.

• Fixed an issue where the last checked task was not saved when running tasks.

• Fixed an issue with blue underlining in property editor not underlining the correct length.

• Fixed an issue where the property editor lost the selection in SolidEdge after running a task

• Fixed an issue that caused a dropdown to still show in the property editor when the analyze rule is disabled.

• Fixed an issue causing the property editor preview to not work when opened via the import structure.

• Fixed an issue that allowed External Datasource to add a mapping without a csv file selected, causing a crash

• Fixed an issue that made properties in the property editor flicker when refreshing

• Fixed an issue where the context menu while in SE edit mode unintentionally allowed actions.

• Fixed an issue in Engineering Data Migration that caused modify logic to apply to already copied files.

• Fixed an issue where some properties with property logic were not prevented from being edited in SE edit mode or the property editor

• Fixed crash when editing a view after adding a new view.

Version 1.5.3-beta (30 June 2026)

• Added better indication of suggestions in the property editor with blue or red underlining of words and with a pointer icon on hover

• Improved the lookup logic property so that it can now handle retrieving multiple columns from an external datasource
  (settings containing older beta version of lookup will become empty)

• The property editor now indicates which properties are changed, and notifies of unsaved changes before closing.

• When using Teamcenter with Solid Edge, SE Edit mode will now be disabled because this scenario is not supported.

• Added new basic logic properties for Set/Copy/Clear property

• Improved suggestion language setting interface

• Fixed some properties in the product table not showing red when the property is invalid

• Fixed inconsistent tooltips of invalid cells in the product table

• Fixed property editor preview where the last properties where not visible with image panel opened

• Fixed a crash when trying to edit material in the property editor when Solid Edge has no material table

• Fixed a crash when changing to settings with different tasks while data is loaded

• Corrected inconsistency with which properties are editable in the property editor and SE edit mode based on if they are used by property logic.

Version 1.5.2-beta (15 June 2026)

• Includes changes of 1.4.12

• Fixed an issue on the products table where right-clicking with multiple rows selected was not possible because it would change the selection

Version 1.5.1-beta (8 June 2026)

• Includes changes of 1.4.11

• Added automatic item number generation options to view settings with multiple numbering strategies, which can be used using the GeneratedItemNumber property

• The CSV BOM export now has a setting to include or exclude the top-level assembly

• The occurrence tree search now continues from the selected node instead of starting from the top

• The "Has up to date document" logic property now has a name field

• Added a preference to use the old full row highlight style for bad properties (analyze rules) on the products tab

• Changes to user environment variables in the settings are now saved immediately

• Changed the property editor preview panel to collapse inward instead of outward

• Fixed obsolete status files being editable in Solid Edge Edit mode

• Fixed the "Has up to date document" logic property not working correctly

• Fixed handling of Alternate position assemblies in the data copy feature

• Fixed external datasource mapping showing the same property multiple times in the dropdown

• Fixed crash related to logic property names

• Fixed crash when adding a environment variable for user

• Fixed some LogicProperty regex not updating correctly to new regex builder result

• Fixed an issue where using multiple different lookup logic properties would all produce the same result

• Fixed an issue where the property editor would not allow any changes to be saved after changes were made outside of Solid Edge

Version 1.5.0-beta

• Main interface

  • Added search to the occurrence tree

  • SE edit mode

  • Column presets can now be saved and shared

  • DataCopy

• Property editor

  • Csv to SE

  • Suggestions

  • Set material in the property editor

  • Added preview image of SE file to property editor

• Settings

  • Environment variables allow you to define custom variables that can be used in formulas and can be set per user (example: OneDrive location)

  • New logic properties:

    • If Empty

    • Number generator

    • Text Join

    • Has up-to-date document

    • Formula

    • Pad number (add zeroes in front of the number)

    • Round to (replaces RoundNumber)

    • Lookup

  • The following settings can now be given a custom name to help remember what it does

    • Logic properties

    • Analyze rules

    • Search related file rules

  • The following settings can now be disabled/enabled without needing to delete the setting.

    • Logic properties

    • Analyze rules

  • Added the Save as Image task that supports multiple image types

  • In the task library, you can now zoom and pan the diagram of a task

  • The settings menu now remembers recently used settings, which can be loaded by pressing the arrow on the Save button

  • The not-empty analysis rule now has a setting to consider whitespace characters as empty.

  • When using a custom regex, you can now set a custom message to show when a property fails the regex

  • RegexBuilder UI simplified by only showing the settings of the current mode

  • Regex analyze rule can not use formula inside regex for advanced situations (must use double brackets: ^[[Document number]][[SourceFileExtension]]$)

Version 1.4.12 (15 June 2026)

• When there are no tasks to run, a toast notification will now show instead of a popup window.

• When errors occurred when running tasks, a popup will now ask if you want to retry. (can be disabled in preferences)

• Fixed an issue in last update that caused settings windows to open behind the main settings window.

• Fixed occasional crash related to opening the property editor

• Improved logging for tasks

Version 1.4.11 (8 June 2026)

• Added a searchbar to the occurrences tree view

• Logic properties can now be re-ordered

• The quick reload context menu action can now be performed on multiple products

• The property editor will no longer be able to be open more than one at a time

• The settings window will now remember if it was maximized, instead of copying the maximized state of the main window.

• The formula editor will now insert a property at the cursor instead of always adding at the end

• The order of occurrences now better match Solid Edge

• Updated the ReplaceBackground task in the task library with a new setting to choose if views should be updated

• The property editor now shows the working filename in the title

• Fixed an occasional crash when opening the settings

• Fixed a crash when trying to remove a file from the task list

• Fixed a crash when a view is named 'Name'

• Fixed a crash when a link to a family of assembly file is broken

• Fixed incorrect sorting of the Count column on the products tab

• Fixed an issue that occasionally caused view settings to not be saved

• Fixed an issue that made the spacebar shortcut to toggle multiple checkboxes on the tasks tab slow

• Fixed an issue where some popups requiring the user to choose an option, would close automatically before the user interacted

• Fixed an issue where opening the property editor by double clicking a row in the product table would select multiple rows as the property editor was loading

• Fixed an issue in multiple tables where double clicking the column header opened the edit menu of the selected row

• Fixed an issue where opening the settings when the property editor was opened, showed the settings behind the property editor while preventing you from closing the property editor

• Fixed an issue where loading newer settings that the application version showed an error message instead of a version warning when opening the property editor

• Fixed an issue that caused the related files settings when editing to forget the condition property

• Fixed the HasDocument and If Then logic properties not working correctly with newly created regexes via the regexbuilder

• Fixed the Example_XML_PartsWithBom example export not filtering correctly

Version 1.4.10

• The loading progress bar will now show more info and can be cancelled better

• Improved logging for Tasks

• Improved replace background task to close the template after all tasks complete

• Fixed replace background task not supporting multiple templates in a batch.

• Added multi editing of checkboxes on task settings (select cells + spacebar)

• Fixed slower loading due to method that unnecessarily activated each document

• Fixed long load times due to some regexes from the regexbuilder

• Fixed crash when running Tasks, now will show an error instead

• Fixed incorrect exclude rule behavior when multiple rules are applicable on a occurrence

Version 1.4.9

• Improved Add SolidEdge property settings popup clarity and safety checks

• Added Type column to Tasks settings

• Added CSV Export setting to save with UTF-8 marker which improves opening with Excel. (Default on. Could impact how applications read the file)

• Changed search related files settings regex mode: using a formula inside the regex now requires [[double brackets]], this ensures the text is matched correctly

• When SolidConnect crashes, it now closes all windows before showing crash popup

• Fixed occurrence sort settings being applied incorrectly to views

• Fixed View settings pages not being disabled when settings file is readonly

• Fixed Add shortcut to SolidEdge button being disable when settings file is readonly

• Fixed double click sometimes not opening edit on task settings

• Fixed tasks in settings being highlighted when another task had the same name even if not present in the same view

• Fixed exporting 0 settings still showing a successfully exported notification

• Fixed property editor crashing if settings contain a missing task

• Fixed crash when using invalid characters in search related files settings using formula mode

• Fixed logic properties not able to set a property empty

• Fixed occurrence properties info text not visible

• Fixed License manager not updating token count after (de)activating a feature

• Fixed Export button dropdown on export structure tab containing duplicate entries

• Fixed property editor crash when the file is readonly

• Fixed If Then logic property still saving regex changes if cancelled

Version 1.4.8

• Fixed issue where some parts created multiple separate products due to different filepath capitalization

• Fixed crash when trying to save or update a settings file that is in use by another program

• Fixed buttons that were not disabled correctly when no data is loaded.

Version 1.4.7

• Changed multiple property selection boxes in settings to be sorted alphabetically

• Settings will now remember which pages are expanded as long as SolidConnect stays active

• Added button to task library to request a custom task

• Updated images in task library

• Added extra info text to Not empty if analyze rule

• Disabled adding new SolidEdge import property while property name field is empty

• Fixed long startup with no internet access

• Fixed crashes when using if then logic property

• Fixed close confirmation popup being shown after fatal error

• Fixed license reminder popup sometimes not shown in front

• Fixed license reminder showing too often for certain license types

• Fixed SolidEdge actions such as select in SolidEdge causing the SolidEdge window to minimize

• Fixed occasional crash when SolidEdge is busy or has exited

• Fixed internal components (unsupported) causing unnecessary errors in log

Version 1.4.6 (Official Release)

• New SolidConnect logo / icon

• Added license reminder popup that will remind you when your license is close to the expiry date. The reminder adapts to your current license type and status to provide the most relevant information.

• Added Regex replace text logic property

• Existing logic properties now have separate settings for source and target property

• Improved the popup that appears when an unexpected error occurs

• Added confirmation message before closing SolidConnect. This can be disabled in the preference settings

• Added warning log when analyze settings do not have a matching property definition setting

• Removed EULA as separate page, EULA can now be found on about page instead

• Starting SolidConnect while another instance is already running now focusses the active instance

• Improved popup messages when editing view specific settings asking to remove or delete, also added cancel option

• Removed warning messages on export when formula results in empty value, now only warns about formula's without a matching property definition setting

• Exporting to CSV without any occurrence with suboccurrences now is not considered as a failed export

• Removing properties now has immediate effect on visible columns.

• Added info tooltip on 'default name formula' setting (General) when 'Get name formula from SolidEdge' is on

• Preference 'Add products to tasks tab on load' is now on by default for new users

• The Property editor will no longer ask to the checkout a file in TeamCenter when a Released status is detected

• All tasks are now included in the Debug Package to better provide support

• Changed Icons for Run all Views and Export buttons to be more distinct

• Changed what setting pages to be automatically expanded

• Added popup before running tasks that can modify files to confirm the risks are understood. This can be disabled in the preference settings

• Fixed include/exclude button disabled when selecting a single product

• Fixed documents being excluded after a quick reload

• Fixed issue where property removed via settings was automatically added back again.

• Fixed missing buttons on Documents tab

• Fixed settings shortcut buttons not correctly opening correct settings page

• Fixed setting window not going back to smaller size when un-maximizing

• Fixed task settings not asking whether to modify extension defaults for this or all views

• Fixed crash on opening occurrence property details when any property has not passed the analyze rules

• Fixed clicking on buttons would not be registered when SolidConnect is not the active window

• Fixed occasional crash on resetting tasks to defaults

• Fixed occasional crash after adding new tasks

Version 1.4.5-beta

• Redesigned settings, each view now has its own page where settings specific to that view are shown in separate tabs.

• HasDocument settings page has been removed, these settings are now found in logic properties

• Added back the ability to include/exclude documents but now per view, which can be used to more easily filter documents

• Added define properties edit button

• Added settings shortcuts to properties, exports and related files

• Added update icon which will show when a new version is available, which opens download page when clicked

• Added help button to main interface and settings, which opens documentation website

• Added buy tokens button to License Manager

• Added names to exclude rules

• Property editor will now only show tasks which are supported for the loaded file type

• Prevent SolidConnect from running twice as a safety precaution (property editor can run simultaneously)

• Adding SolidConnect shortcut to SolidEdge now also adds to draft environment

• Improved settings window opening location/state

• Improved export toasts for more clarity, with separate messages when one or multiple exports are run

• Added error message when SolidConnect cannot connect to SolidEdge because it must be run with the same admin privileges

• Changed feature names in License Manager: Custom Settings > SolidConnect, BatchHandler > Tasks

• Fixed tasks sometimes not running the same tasks as shown in the tasks table

• Fixed XML export error when using filters on properties that can be empty

• Fixed tasks using formula for filename were cut short when a dot would be part of the filename

• Fixed task settings not hiding checkboxes for unsupported extensions of tasks

• Fixed opening settings via the tasks shortcut button not doing appropriate checks after closing settings

• Fixed multiple property related tasks errors

• Fixed loading form opening behind SolidConnect

• Fixed some remaining Flow texts not renamed to Task

Version 1.4.4-beta

• New improved export settings interface

• Added SolidEdge general setting to get occurrence item number per level per assembly instead.

• Added icon for Open in regexbuilder buttons

• Added search field for edit visible columns popup

• Added new 'If then' logic property

• Added button to define properties which redirects to SolidEdge property settings-

• Added new popup asking to reload after changing settings. Can be disabled in preferences.

• Renamed exclude rule types to "Exclude Self and Children","Exclude Self","Exclude Children" for clarity

• When adding a new exclude rule, it is automatically checked for the active view if possible

• Tasks from default tasks folder will now be automatically copied to appdata folder to allow immediate editing. It is still advised to save .flow files on shared network.

• Changed broken link error behaviour from cancelling load to continue loading but with products marked as not loaded.

• Fixed Replace Backgrounds tasks errors when updating multiple drafts. Improved error handling and logging

• Fixed family of assemblies giving broken links error

• Fixed XML incorrect export issue when SubOccurrences of Part node hides self

• Fixed load error popup still showing when starting SolidConnect with no SolidEdge document available

• Fixed List of Values analyze rule considering empty values as bad. You should use NotEmpty rule for this check.

• Fixed settings highlighting multiple pages

• Fixed context menus for property editor and design manager being enabled when multiple objects are selected.

• Fixed settings save/done button styling to be consistent with the application

• Fixed issue where sometimes product are not considered the same when both 'mass' and 'Mass' properties are defined

• Updated default settings to have ExportOnRunAll and FlowsOnRunAll on for default view.

• Renamed some settings and fixed typos

Version 1.4.3-beta

• Added extra info text when the tasks are empty

• Added extra info text when the occurrence properties are empty

• Added extra export button on export structure tab

• Added extra run tasks button on tasks tab

• Moved View settings page

• Updated texts that have not changed flows to tasks

• Changed regexbuilder test field to be collapsed by default

• Fixed crash when pressing Show Last Report or Continue when no previous task reports can be found.

• Fixed only being able to select rows, not cells in tasks

• Fixed crash when double-clicking the products column headers

• Fixed being able to add a view with duplicate name when pressing enter

• Fixed incorrect icon showing in details for bad properties

• Fixed error with Convert to number logic property

• Fixed crash on loading SolidEdge documents with broken links

• Fixed old flows/tasks remaining in task library after update

Version 1.4.2-beta

• Added Views. Each view allow you to have different exports, flows and exclude rules. First create a new view in the settings, then you can change your settings for the view on the settings pages for exclude rules, exports and flows. You can run flows/exports for multiple views at once.

• Added instruction video when first opening the application

• Added SolidEdge settings to be able to read if the file is a weldment assembly and to read its bead density and material

• Added TeamCenter status property name setting to be able to read the status correctly.

• Improved default columns

• Added 'clear user data' button on about page

• Added links to help page and instruction video on about page

• Simplified menu for editing visible product property columns

• Easier editing of settings when no settings file is loaded.

• Added different double click action setting for the product tree

• Add to flow table button now only adds selection, Ctrl click to add all products. Add all product button also added to flow tab.

• Checkboxes in structure view are now always visible, setting to disable editing these has been moved to General settings

• Improved tooltips

• Added button to add SolidConnect shortcut to SolidEdge toolbar (SolidEdge general settings page)

• The top-most product can now be excluded, now supporting multiple top-level products

• Exclude rules can now also be based on occurrence properties

• Excluding occurrences that are set to not report in SolidEdge occurrence properties has changed to an explicit exclude rule

Flows:

• Flows have been renamed to Tasks

• Added dropdowns to some flow variables

• Unsupported file extensions of a flow will now not show a checkbox.

• Improved details and descriptions of all flows

• Failed Flows will no longer be re-attemped twice. You can still retry flows by clicking retry/continue

• Fixed input prompts showing multiple times for the same value

• Flows are now re-orderable
  New/Updated Flows:

• Create flat pattern

• Optimize body

• Part to Sheet Metal

• Replace background (for drafts)

• Set background white

• Show/Hide components

• View options

• Set Item ID flow (takes file with a number and sets the number as a property to each file and automatically increments number)

• Changed hide components flow to also be able to show all

• Changes most file manipulation flows to actually save the changes.

• Save 3d as JPG flow now also sets background white and hides all components

New Logic properties:

• Round Number

• Trim text

• Substring

• Squashed many bugs

Version 1.4.1-beta

• Added Xml export data mode setting, which allows to export each part or occurrence as separate files.

• Added save draft as image job

• Fixed NotEmpty and NotEmptyIf analyze rules not working when property is not found or has no property definition

• Fixed NotEmpty and NotEmptyIf analyze rules for product properties also applying to occurrenses and vice versa

• Fixed files with capital extensions such as .PAR not able to be added to flow table

• Fixed setup always detecting changes

• Fixed not being able to edit checkboxes of flows from default flows folder

• Fixed crash when flow file could not be found

Version 1.4.0-beta

• Analyze settings have been reworked, there are now many simpler rule types replacing the old general rule. The new List of Values analyze type has a tool to add multiple values based on loaded data. The convert number setting previously part of the analyze rule is now a logic property. (old settings should automatically be converted)

• Export button now has a dropdown to export using any specific export template

• Export settings now have an 'Export' checkbox per template to allow multiple templates to export at once when pressing the export button

• Loading an assembly file that contains a family of assemblies is now supported (loads active member)

• Flows now include more info such as a description and image which are shown in SolidConnect.

• Added flows:

• Set view options

• Hide components (PMI, Reference planes, etc.)

• Set Property

• Find Replace property value

• Delete property

• XML export collection nodes such AllParts can now be set to hide themself, adding the Part node directly to the parent node

• Fixed crashes on clicking table headers in settings pages related to flows

• Fixed errors when deleting old setting backups

Version 1.3.6

• Moved add flow from flow library button to the add button.

• Fixed settings being forgotten when switching between settings pages.

Version 1.3.5

• Fixed crash on loading an unsaved document from SolidEdge

• Fixed loading bar not closing after quick refresh

• Fixed missing required properties of wrong type being shown (Product/Occurrence)

• Fixed required rules also applying to wrong type (Product/Occurrence)

• Fixed crashes when running flows

• Fixed property editor not saving correctly when pressing save while still editing a cell

• Show checkboxes in import structure preference now applies without needing to load again.

Version 1.3.4-beta

• Added logic property to replace text in a property

• Added digital signature (should make windows trust SolidConnect)

• Added new variants of translated file flows which upload translated files to TeamCenter

• Property editor can now checkout files from TeamCenter

• Faster saving properties with the property editor

• BatchHandler now only starts opening a SolidEdge file when a job requires it, reducing processing time for files with only skipped jobs.

• Added quick refresh button which re-analyzes properties and searches for related files. Quick refresh automatically after runnning flows or changing settings

• Improved interaction of the dropdown boxes in property editor

• Improved default product table configuration

• Flows that are not found are no longer removed from settings

• Added ctrl-S shortcut in property editor

• Added EULA and EULA page

• Added about page to setup

• Added button to export debug package on about page, for bug reports

• Changed default flow variables to save to FlowCreatedFiles folder

• Changed default related files to search any FlowCreatedFiles folder

• Fixed inconsistent display of property name (properties are no longer unneccesarily converted to lowercase)

• Fixed columns with specific names not working in product table

• Fixed crashes when two flow have similar or the same name

• Fixed regex max character length cannot enter any value above 100

• Fixed setup navigator only auto-expanding once

• Improved regex formula for list of values mode

Version 1.3.3-beta

! SolidEdge status property is now automatically converted to text. This can break any setting which check for the number value, these have to manually updated to their equivalent text value.
! Added Token requirement for the batchhandler (release version)

• Added button to SolidEdge import settings to quickly add multiple file properties which statistics showing how complete the data is

• Property editor can now load the selected part in SolidEdge, a preference setting has been added to disable this

• Property editor can now add file properties to SolidEdge files if they don't exist yet

• Added checkbox to hide readonly properties in Property Editor

• Added toast notifications to reduce popups

• Running flows no longer closes and reopens active SolidEdge documents

• Added preference setting to automatically run flows when exporting

• Added preference setting to Always/Never save SolidEdge Documents when running flows

• Moved run flow button to top

• Improved load time of setup screen

• Removed flows setting "Use existing SE instance" (now always uses existing)

• Settings page list is expanded by default

• Missing property definition settings are automatically added

• Added button to flow settings to load flows from the flow library

• Fixed filtering of document date modified columns

• Fixed Property editor showing properties which are set not visible in settings

• Fixed error sounds on some menus

• Fixed LicenseData write permissions

Version 1.3.2-beta

! Flows in the default flows folder of SolidConnect can no longer be edited, you will now need to duplicate them to a new location. In future updates we will change the installer to overwrite the default flows, please make sure you have moved these flows. If your settings are on a network location, you should also place your flows there.

• Moved user specific settings to new preferences page which is always editable.

• Added button to add predefined set of file property settings for users of TeamCenter X Essentials

• Added warning for csv export settings with duplicate column names, this is unsupported.

• ExportDateTime formula now uses a new format to make sure they are allowed in filenames (now "yyyy-MM-dd HH-mm-ss")

• Added new flow for saving a Step file but with extention .stp (this flow will not be automatically added in your settings, you will need to manually add it, you can find the file in the SolidConnect application folder in Services\FlowHandler\DefaultFlows)

• Changed default flow for SaveAsJpg to ensure the part fits in the image. Currently default flows are not overwritten by the installer, this new flow will also be provided separately.

• Closing settings window now also checks for changes.

• The settings windows is now loaded during splashscreen to reduce delay when opening

• Fixed crash when pressing the edit button in the flow variable edit window.

• Fixed unknown SEDM file status when status was not capitalized in property definition settings.

• Fixed some potential issues in the BatchHandler

• Fixed logging of user config file location.

• Fixed incorrect loading bar text when loading process fails.

• Fixed settings version check not working if settings file is not deserializable

• Fixed default flow settings when upgrading from existing settings.

• Fixed properties displaying 'Unexpected value'

Version 1.3.1-beta

• Fixed property editor crash

• Fixed property editor not analyzing properties after changes.

• Fixed property editor not able to save properties which were empty when read.

• Fixed property editor not able to save empty value.

• Fixed quick reload not updating properties that have been made empty.

Version 1.3.0-beta

• Added property editor which is a separate tool allowing you to load and edit properties of SolidEdge files, run flows, see related documents and more, read manual for details.

• Settings have been separated: Property analyze settings are now fully separate and not required, multiple analyze rules can now apply to one property. Import settings for SolidEdge and PlmXml are now separated. New property definition settings are added in which you need to define which properties you want to have, when configuring import setting you need to choose a defined property to save to. Properties can now be hidden.

• User interface has been improved

• Added double click action in products and documents tables to quickly use one of the right-click menu actions, this is configurable in settings, default is Property editor for Products and Open File for Documents

• Added extended support for namespaces in xml export.

• Beta versions of SolidConnect now have a different color icon and extra text to make it easily identifiable

• Fixed quick reload of properties not working on the loaded document itself.

• Developer mode setting have been removed.

Version 1.2.4

• Fixed license activation not working even if key should provide access to release version.

Version 1.2.3

! Feature token prices have changed, these changes apply to only the release build, the beta version always gives access to all features. Export now costs 3 tokens (from 4). The ability to use custom settings now costs 2 tokens (from 0)
! Beta licenses no longer also grant access to the release versions of SolidConnect by default, this can now be different per beta license.

• Fixed inconsistent scaling issues when using windows scaling settings

Version 1.2.2-beta

! Beta licenses no longer also grant access to the release versions of SolidConnect by default, this can now be different per beta license.

Beta exclusive (batch handler):

• Flow settings now detect when flow files are readonly and doesn't crash when trying to edit them.

• Batch handler now uses the active SolidEdge instance by default. It now also prompts the user to close active files.

• Recent batch jobs are now saved for debugging

• Added new related files settings to check for a specific filepath which requires no searching (very fast).

• Fixed Xml export error on attributes such as 'xmlns:xsd'

• Changed license tampering check to reduce unneccesary warnings, when the license data is changed unexpectedly the license is first checked with the license server

• Added check for extra SolidEdge instances, automatically closes empty ones if possible, warns user if multiple are found.

• Changed most logs for searching related files to be hidden instead of warnings.

• Searching related files now also uses the loading bar.

• Changed auto-generated regex for search related files settings to better handler files with dot in its name. (To make sure these changes are applied, please go edit each setting and save them again.)

• Added 'SolidConnect Beta release' text to main interface to easily distinguish a beta version

• Changed executable icon of beta version to easily distinguish a beta version

• Activating a license should no longer be sensitive to extra space characters at the start or end of the input

• Settings save button automatically does a save-as when no custom settings path is currently used

• Improved log button icons and added 'close logs' text while opened.

• Default settings are now embedded in the application to prevent editing them.

Version 1.2.1-beta

Beta exclusive (batch handler):

• Removed most errors when readonly files are used in flows.

• Added delete keybind to remove files from flow tab

• Added button on products tab to add all files to the flow tab.

• Added setting to automatically add all files to the flow tab.

• Files now need to be closed before running flows

• Fixed issue where SolidConnect would not detect if SolidEdge could not be started

• Fixed unparsed formulas in flows not being detected.

• Moved default location of batch file to appdata

• Improved logging for batch handler system

• Added button to copy documents to clipboard (as if copied in file explorer)

• Added context menu for documents: Copy,Zip,FileList

• Document Copy,Zip,FileList button now use selected documents instead of all visible documents

• Added more file info to (related)documents table (modified date & file size)

• Added SourceFileModifiedDate as a standard property to products

• Draft files are now allowed to be opened with design manager

• Fixed design manager not opening in front of other windows.

• Fixed SolidEdge custom file properties with the same name as a standard SolidEdge property being prioritized.

• Files now need to be closed before opening design manager

• Fixed properties of parent object not exporting to XML

• Fixed issue causing SolidConnect to not launch correctly when added as macro in SolidEdge

• Fixed errors during startup not being correctly handled.

• Fixed crashes after clicking on some ui elements (filter button, column headers)

Version 1.2.0-beta

• Beta exclusive: (will not be included in next release)

• Added new batch handler system which can execute tasks at bulk on SolidEdge files.

• IMPORTANT: Renamed properties: FullFileName > SourceFullFileName, FileName > SourceFileName, FileExtension > SourceFileExtension,FileNameNoExtension > SourceFileNameNoExtension,FilePath > SourceFileDirectory. These settings will automatically be updated: Property names in property analysis, part sort settings, exclude rules. You will need to change product table column settings manually. The following settings will keep working but are adviced to update: General > Name formula, formulas and filters in export settings

• Improved settings interface

• Added settings to customize how related files are searched

• Added logical property 'HasDocument' which can check for related files

• Added context menu open in design manager.

• Added setting to automatically load on start. This is a user specific setting. This will be automatically disabled after a crash.

• Added setting to hide checkboxes on import structure

• Added button to create a filelist on documents tab

• Added partial support for family of assembly, take caution.

• Changed regexbuilder default character set to Any.

• Fixed changes not being detected after pressing save as.

• Added launch argument to read specific SE file, contact enginia for details as this is in early testing.

Version 1.1.6

• Fixed crash when opening regex builder in exclude rule settings.

Version 1.1.5

• Fixed crash when adding new property analyze setting and cancelling

• Fixed issue where restoring the previous location of the SolidConnect window would result in it being outside any screen.

Version 1.1.4

• Improved fallback filename for xml export

Version 1.1.3-beta

• Fixed an issue where the license manager did not consider features to be activated after having used SolidConnect recently.

Version 1.1.2-beta

• Fixed an issue where tampering of the license file was working incorrectly when using both a beta and non-beta version. Note that the tampering warning might still pop up once.

Version 1.1.1-beta

• Fixed exclude rules still changing regexbuilder settings after cancelling

• Fixed Property required rules still changing after cancelling

• Fixed license manager issue where an extended license would stop working after the original expiry date

• Fixed issue where internal components (currently unsupported) were unintentionally loaded

• Fixed issue where bad properties prevented an export when running via launch arguments

• Fixed rare crash caused by triggering a load before the settings are correctly loaded

• Added version number to settings file

• Regexbuilder List of items should now support special characters correctly

• Beta version should no longer display the debug variant of the license manager window

Version 1.1.0-beta

• Updated the buttons at the top of SolidConnect with cleaner icons. The Load button can now be pressed on the left side to perform the default load action, or the dropdown can be opened by clicking the arrow on the right side of the button to use a specific mode.

• PlmXml files (export from TeamCenter) can now be imported. See the manual for details on what is and isn't supported.

• First beta build of SolidConnect. Only a beta test license is valid in this version. This version operates completely independently of the normal build. Settings, logs, and other data are stored separately.

• Properties that are invalid according to the analysis regex now provide more detailed explanations of what is not allowed when using 'Custom Rules' in the regex builder. The same feedback is also available in the test field within the regex builder.

• The FileName Safe character set in the regex builder now approves special characters by default. (Previously, many characters were rejected even though they were allowed in file names.)

• The regex builder now has a new character set, 'Any', in which all characters are allowed.

• Added the option for a fully offline activation of a license.

• Added a button to save a zip file of the document list.

• SolidConnect now has basic capabilities for automatic execution via command. Please contact Enginia first if you wish to use this functionality.

• Fixed an issue where old settings with special characters in the exclude rules were not correctly converted to the new regex exclude rule.

• Fixed an issue where the 'Open File' action in the right-click menu was not available on documents.

• Note: Major parts of the code have been rewritten; this may have introduced issues in existing functionality.

Version 1.0.10

• Added a new method to read mass, found under ‘structure analysis’. This method no longer uses the variable table. It is more reliable and returns fewer empty values. The mass of frames is now correctly read per segment, whereas previously the mass of the base part was read (incorrectly).

• Exclude rules now use regex instead of a fixed value. Old settings are automatically converted to regex.

• Mass and Cut length are now read based on the units set in the active document that is loaded.

• Pipe length is no longer read as it was incorrect and no alternative was found.

• Added a new ‘any’ character set to the Regexbuilder.

• Adjusted the Regexbuilder ‘Filename safe’ character set so that incorrectly rejected special characters are now approved.

• The minimum length in the Regexbuilder can now also be zero.

• The Regexbuilder fields ‘start with’, ‘include’, and ‘end with’ now support more characters, allowing for example a folder path to be used.

• Added warnings when physical properties are out of date

Version 1.0.9

• Added option to enclose values in double quotes in CSV export (this was added in 1.0.8 but was not configurable)

• Item number of occurrences can now be used in export

• Improved logs

• Fixed issue where XML properties of parent were not exported

• Fixed issue where multiple properties with the same name were added, this is currently not supported

• Fixed issue where warnings or errors were not communicated to the user via icon on log button and via popups after loading or exporting

• Fixed issue where the revision column did not display data in the products table

• Fixed issue where XML export for empty fields wrote two lines

• Fixed issue where export showed warnings if the export folder setting ended with a slash

• Fixed issue where occurrence properties were not exported to CSV

Version 1.0.8

• Added the following Csv export options: Toggle export, add column headers, export as separate files, file extension, separator character. (IMPORTANT: Existing users of csv export need to change these settings because the new defaults function differently)

• Added a Product tab, This functions similarly to how the documents tab previously functioned but it is now not directly assosiated with a specific file. Related files of a product can now instead be seen in the updated details (previously properties) window on the right. This now also searches for other similar files in the same folder. The documents tab now provides an overview of all found files. These changes will allow for more functionality in later versions.

• Excluding all suboccurrences in the import structure view is now again possible by ctrl-clicking the checkbox.

• Context menu items are reordered.

• The buttons which were also usable via the context menu are now removed from the main interface in our effort to clean up and simplify SolidConnect.

• Fixed issue that caused deleting an xml export setting to overwrite another existing setting.

• Changes made to settings now have better logging

• Backups are now created for setting files in the appdata folder (next to logs).

• Fixed crash when trying to create the export folder but permission is denied.

• Improved clarity of requesting a trial.

• When adding a new column in csv export settings, it is now inserted after the selected column, instead of at the end.

Version 1.0.7

• When editing which column are visible (right-click on column header > edit) the list of available options is now alphabetically sorted

• Added MyDocuments as an option in the export folder formula

• The default export settings now target the MyDocuments folder and use FileNameNoExtension as filename. These default settings ensure a new install can always do an export without needing to change settings.

• Improved the popup when closing settings with unsaved changes

• Fixed saving settings as a new file, the displayed path in the setting window did not update.

Version 1.0.6

• Removed old progress bar on main interface (obsolete since separate popup progressbar)

• Added new button to display the current activation key (no longer auto-fill the current key in the activate key popup)

• Combined save,save as and load settings into one button with a dropdown
  (when loading a settings file, it is not needed to save (which might not be possible when it is readonly), this is hopefully more intuitive now)

• License system now only does a quick check when the license has already been checked recently to speed up starting the program.

• Added loading info to splash screen

• When loading a readonly settings file, the setting interface is disabled

• Fixed crash when trying to save settings to a file without write permissions.

• Fixed issue where the open properties button did not appear while the panel was closed on startup

• Fixed issue where activating a key would crash the application when the ProgramData/SolidConnect folder did not exist

• Fixed crash when adding a new property analysis setting

• Fixed export examples not loading after loading another settings file

Version 1.0.5

• New Licensing system based around tokens is implemented. Specific features require tokens to be spent to unlock.

• Setting added to toggle whether solid connect automatically loads again after saving settings.

• When using an action such as open fileproperties while the active document in Solid Edge has changed, solid connect not ask if you want to activate the needed document again if possible

• A context menu (right-click) can now be used on the import, export structure and documents list

• Properties that are generated or required by solidconnect (Status, FileName, HasDraft) now auto-generate

• When the settings file cannot be found, the old filepath in settings is cleared.

• When saving the setting to a new file for the first time, it has a default filename and opens My documents as the default folder.

• archived log files are now also written to appdata

• When first launching solid connect and no settings file is configured, no longer does an popup appear that no settings were found.

Version 1.0.4

• The file properties side panel can now be hidden

• A single part file can now be loaded instead of only being able to load assembly files

• The export settings for xml are completely reworked to a new very flexible system. The export settings interface for CSV is now a bit simplified but still functions the same.

• Multiple export settings can now be created in one solid connect settings file. Example settings are added. These export settings can be added/saved independently.

• FilePath property added

• Fixed crash when Patterned or mirrored items are hidden and loaded with visible only mode

• Fixed an issue where two occurrences were separated in the export tree even if their occurrence properties were the same (if 'separate by occurrence properties' was turned on)

• Fixed crash when loading an assembly with missing files.

Version 1.0.3

• When a regex is saved with list of items mode, opening the regexbuilder caused the characterset dropdown to have no selected item. This caused a crash when switching to custom rules and saving without changing the character set.

• When using a quick action button (such as open fileProperties in SE), while the active document in SE has been changed since loading, errors are prevented and a pop-up informs of the problem.

• When checking 'allow linebreaks' in regexbuilder, now correctly show the change in the regex.

• The loaded assembly now also checks for a matching draft file.

• When loading, the document/occurrence count is reset.

• The export button will be disabled during loading.

• When reading file properties but encountering a shareviolation, fileproperties will be read via a backup method. This reduces situations where files will not be read succesfully.

• The revision number is hidden in the import structure as this currently does not yet have any functionally.

• A button has been added to quickly reload properties of a specific file. This has a few limitations, dee the hover-tooltip for more info.

• A button has been added to quickly open the selected file in SE.

• Changes the location logs are written to from the executable folder to Appdata, this ensures logs can be written and will not have problems with write permissions.

• Changed icon of the document include column and changed the selected row highlight color to improve visibility.

• The layout of columns in the document view are now remembered (order,width,hidden). This is stored per user. Adding properties as extra columns can now be done with the context menu (right-click on column headers) and has been removed from the setup. Changes now don't need to reload the whole assembly. A button has been added to reset the columns layout to default.

• Loading an assembly now opens a separate loading window that allows you to cancel the loading process.

• The buttons to select all occurrences & open occurrence properties are now noticeably quicker in bigger assemblies.

• The buttons to Open PhysicalProperties and MaterialsTable can now be used when a document is selected.

Version 1.0.2

• Part sorting

• Regexbuilder improvements:

  • include characters

  • set custom regex to current regex

  • multiline/linebreak checkmark

  • textbox to test regex

• Automatically activate parts, changed visible only mode.

• UI changes

• document list changes

  • hasDraft

• Loglevel checking stopped working

• Settings always saving to file

• Load button stays disabled when failed to load ASM

• Prevent crash when trying to save while settings path is empty (first launch of app)

• Include/Export not set correctly when first occurrence is hidden